Prime Dent
Showing all 12 results
-
Endodontics, Sealers & Cements
Sealant Pit & Fissure Light Cure Kit – Prime Dent
Prime-Dent Pit And Fissure Sealant is a Bis-GMA-based filled sealant resin, formulated specifically for the sealing of small pits and fissures. The flowable sealants have excellent penetration into light adaptations with a high bond strength to the enamel for high wear resistance.
Available in the following colors:
- Clear – ref. 007-022
- Opaque – ref. 007-023
Includes 3 Syringes x 1.5 g.
SKU: n/a -
Endodontics, New Products, Sealers & Cements
Silane Bond Enhancer | Prime-Dent
Silane Bond Enhancer | Prime-Dent, increases the bond strength of organic resins, such as composites and resin cement, to porcelain. Apply silane to the etched and dried porcelain surface. Conveniently dispenses one drop at a time from the syringe
Content
- 4 seringas | ref. 008-SBE
SKU: 008-SBE -
Endodontics, Sealers & Cements
Surface Sealant | Prime dent
Light Cure Composite Surface Sealant | Prime Dent, a light-cured methacrylate based, unfilled, penetrating, low viscosity resin.
- The sealant has a very low oxygen inhibition layer and can be cured in ultra thin layers.
- Reduces microleakage and seals micro-cracks and irregularities in composite restorations.
- Finishing and polishing composite creates microscopic defects in the surface and at the margin, resulting in accelerated loss of composite.
- The sealant penetrates and seals the composite surface, thus reducing wear and marginal breakdown.
- Microleakage is reduced for new and existing composite restorations.
- Bonds well to composite type provisional restorations and helps revitalize old composites leaving a smooth enamel-like finish.
Applied immediately upon completion of restorations.
Content
- 7 ml | ref. 005-010
SKU: 005-010 -
Endodontics, Sealers & Cements
Zinc Oxide Cement Reinforced | Prime-Dent
Zinc Oxide Eugenol Cement Reinforced Material | Prime-Dent, this cement has a sedative effect on the pulp and is especially useful for cementation on prepared teeth with exposed dentinal tubules. The addition of polymers as reinforcing agents have transformed it into a final cement and intermediate restorative material with a compressive strength of 5400 psi. Offers excellent adhesion and easy removal.
Content
- 50 g powder + 15 ml liquid | ref. 010-090
SKU: 010-090 -
Endodontics, Sealers & Cements
Zinc Oxide Eugenol Cement | Prime-Dent
Zinc Oxide Eugenol Cement | Prime-Dent, this material is a non-irritating formulation for the temporary cementation of crowns and bridges. It is presented in the form of a powder and liquid. Strong adhesion and easy removal.
Content
- 21 g powder + 7.5 ml liquid | ref. 010-080
SKU: 010-080 -
Endodontics, Sealers & Cements
Zinc Phosphate Cement | Prime-Dent
Zinc Phosphate Cement | Prime-Dent, a very high strength permanent cement (131 Mpa compressive strength) representing perhaps the oldest and most well-accustomed cement still in use. It also provides a good insulating layer against thermal shock.
Content
- 32 g powder + 17.5 ml liquid | ref. 010-030
SKU: 010-030 -
Composites and Restoratives
Composite Light Cure Nano Hybrid – Prime Dent
Nano-Hybrid Composite | Prime dent, a resin composite with unique nanofiller technology. Formulated with nanocluster filler particles, the composite is purposed to combine the strength of a hybrid and the polish of a microfil.
Nanomers are discrete nanogglomerated particles of 7 nm in size. Nanoclusters are loosely bound agglomerates of nano-sized particles. The agglomerates act as a single combination of non-agglomerated 7 nm nanosilica filler and aggregated schott glass/silica nanocluster filler. The cluster particle size range is 0.7 microns. The filler loading is 74% by weight. This reportedly provides increased filler loading, better physical properties and improved polish retention when compared to composites containing only nanoclusters.
SKU: n/a -
Composites and Restoratives
Composite Light Cure Flowable – Prime Dent
Flowable Composite | Prime-Dent, Highly polishable, 67% filled, esthetic composite used for all types of cavity preparations.
The composite has a nominal particle size of 0.7 micron. An ideal choice for both anterior and posterior applications and also as a pit and fissure sealant. Ideal for repairing small defects and filling in cervical gaps caused by toothbrush erosion and receding gums.
Also used to eliminate undercuts prior to taking impressions for composite inlays and to line cavities and fill in difficult access areas prior to placing condensable composites.
Easy to polish to a high luster. Has high compressive strength as well as low shrinkage, resists wear and staining. Radiopaque for easy identification in radiographs.
SKU: n/a -
Composites and Restoratives
Composite Light Cure Micro Hybrid – Prime Dent
Micro-Hybrid Composite | Prime Dent is a light-cured resin-based dental restorative composite which contains approximately 76% by weight (60% by volume) inorganic filler with an average particle size of 0.7 microns.
Ideally suited for anterior and posterior restorations. With high polish, handling characteristics and esthetic properties most preferred by dentists.
SKU: n/a -
Composites and Restoratives
Composite Light Cure Hybrid – Prime Dent
Hybrid Composite | Prime-Dent, a light-cured resin-based composite used for all types of cavity preparations. An ideal choice for both anterior and posterior applications. Easy to mold, sculpt and polish to a high luster. Has high compressive strength as well as low shrinkage and resists wear and staining. Radiopaque for easy identifications in radiographs. Incisal(translucent) and dentin (opaque) shades available.
SKU: n/a -
New Products
Impression Tray Adhesive – Prime Dent
Impression Tray Adhesive – Prime Dent, a paint on tray adhesive for use with all alginates: it helps to keep the alginate firm in the tray during removal from the mouth. The tray adhesive comes with a convenient brush inside the cap.
Available in Amber and Blue
Presentation
- 1 oz. Bottle Amber – Reference: 017-019
- 1 oz. Bottle Blue – Reference: 017-020
SKU: n/a -
Sealers & Cements
Luting Cement Automix Dual Core – Prime Dent
Luting Cement Automix Dual Core – Prime Dent, a unique auto-mix system, dual cure, filled multi-purpose permanent cement. The cement is for use in final cementations: Implant prosthesis, Crown and bridges, Inlays, Onlays, Veneers
- A resin and glass ionomer formulation that chemically bonds to both tooth structure and metal.
- The combination of glass Ionomer and resin technology creates a high tensile in compressive strength, low film thickness to assure complete seating of permanently fixed restorations.
- Radiopaque for easy identification in radiographs.
- Compatible with all dentin/enamel bonding systems.
Presentations
- A2 10g Automix Syringe + 5 Blending Tips. + 5 Intra Oral Tips. – Reference: 100-101
- A2 KIT (4 x Automix Syringes of 10 g + Blending Tips. + Intra Oral Tips) – Reference: 100-100
SKU: n/a
